MPESB ITI Training Officer (TO) Syllabus – Electronic Mechanic, Refrigeration & AC Technician, Diesel Mechanic & More Posts

If you are practicing for the MPESB ITI Training Officer (TO) Recruitment 2026 must check the syllabus and exam pattern of Exam. The syllabus is different according to MPESB ITI TO Recruitment 2026 according to post. The MPESB ITI Training officer are Electronic Mechanic, Refrigration & AC Technician, Diesel Mechanic & More Post available in below with syllabus. Also at the end you can download the MPESB ITI TO syllabus in pdf format.

MPEST ITI Training Officer Recruitment: Exam Pattern

Check the MPESB TO Exam Pattern 2026 in table below:

MPESB ITI Training Officer 2026: Electronics Mechanic Syllabus

1. Workshop Operations: Perform basic workshop operations using suitable tools for fitting, riveting, drilling etc., observing suitable care & safety following safety precautions (NOS: ELE/N1002).
2. Electrical Measurements: Select and perform electrical/electronic measurement of single range meters and calibrate the instrument (NOS: ELE/N9401).
3. Battery Testing: Test & service different batteries used in electronic applications and record the data to estimate repair cost (NOS: ELE/N7001).
4. AC/DC Measurement: Measure AC/DC using proper measuring instruments and compare the data using standard parameter (NOS: ELE/N9402).
5. DSO Testing: Measure the various parameters by DSO and execute the result with standard one (NOS: ELE/N9403).
6.  Soldering Skills: Plan and execute soldering & de-soldering of various electrical components like Switches, PCB & Transformers for electronic circuits (NOS: ELE/N7812).
7. Component Testing: Test various electronic components using proper measuring instruments and compare the data using standard parameter (NOS: ELE/N5804).
8. Power Supply Assembly: Assemble simple electronic power supply circuit and test for functioning (NOS: ELE/N5804).
9. Analog Circuits: Construct, test and verify the input/output characteristics of various analog circuits (NOS: ELE/N9404).
10. Power Electronics: Plan and construct different power electronic circuits and analyse the circuit functioning (NOS: ELE/N1201).
11. Opto-electronics: Select the appropriate opto electronics components and verify the characteristics in different circuit (NOS: ELE/N6102).
12. Digital Circuits: Assemble, test and troubleshoot various digital circuits (NOS: ELE/N1201).
13.  Circuit Simulation: Simulate and analyze the analog and digital circuits using Electronic simulator software (NOS: ELE/N6102).
14. Linear ICs: Construct and test different circuits using ICs 741 operational amplifiers & ICs 555 linear integrated circuits (NOS: ELE/N9405).
15. Engineering Drawing: Read and apply engineering drawing for different application in the field of work (NOS: PSS/N9401).
16. Basic Science/Math: Demonstrate basic mathematical concept and principles to perform practical operations. Understand and explain basic science in the field of study (NOS: PSS/N9402).
17. Cable Preparation: Prepare, crimp, terminate and test various cables used in different electronics industries (NOS: ELE/N6307).

MP ITI Training Officer Electronics Mechanic Syllabus – (Next Topics)

1. PCB Rework: Rework on PCB after identifying defects from SMD soldering and de-soldering (NOS: ELE/N5102).
2. Control Circuits: Construct different electrical control circuits and test for their proper functioning with due care and safety (NOS: ELE/N9407).
3. AM/FM Receiver: Assemble and test a commercial AM/FM receiver and evaluate performance (NOS: ELE/N9408).
4. Programmable Systems: Test, service and troubleshoot the various components of different domestic/industrial programmable systems (NOS: ELE/N9802).
5. IoT Sensors: Execute the operation of different sensors, identify, wire & test various transducers of IoT Applications (NOS: ELE/N9409).
6. IoT Architecture: Identify different IoT Applications with IoT architecture (NOS: ELE/N3102).
7. Project Work: Plan and carry out the selection of a project, assemble the project and evaluate performance for a domestic/commercial application (NOS: ELE/N9802).
8. Fibre Optics: Prepare fibre optic setup and execute transmission and reception (NOS: ELE/N5902).
9. Display Panels: Plan and Interface the LCD, LED, DPM panels to various circuits and evaluate performance (NOS: ELE/N8107).
10. Power Electronics Troubleshooting: Detect the faults and troubleshoot SMPS, UPS and inverter (NOS: ELE/N7202).
11. Solar PV Systems: Identify, Test and verify characteristics of Photovoltaic cells, Modules, Batteries and Charge controllers. Install a solar panel, execute testing and evaluate performance by connecting the panel to the inverter (NOS: ELE/N5902).
12. Mobile Phone Repair: Dismantle, identify the various parts and interface of a cell phone to a PC. Estimate and troubleshoot (NOS: ELE/N8107).
13. LED Lighting: Check the various parts of a LED lights & stacks and troubleshoot (NOS: ELE/N9302).
14. LCD/LED TV Repair: Identify, operate various controls, troubleshoot and replace modules of the LCD/LED TV & its remote (NOS: ELE/N3102).
15. Engineering Drawings: Read and apply engineering drawing for different application in the field of work (NOS: PSS/N9401).
16. Practical Mathematics: Demonstrate basic mathematical concept and principles to perform practical operations (NOS: PSS/N9402).

MPESB ITI Training Officer 2026: Refrigeration & AC Technician Syllabus

1. Trade Safety: Identify trade related hazards and safety procedures following safety precautions (NOS: ELE/N1002).
2. Fitting Operations: Produce fitting jobs as per drawing (marking, sawing, filing, drilling, reaming, tapping, dieing) (NOS: ELE/N3114).
3. Sheet Metal Work: Produce sheet metal components (bending, riveting, soldering, marking, metal cutting) (NOS: ELE/N3114).
4. Electrical Safety: Identify electrical safety. Join wires, measure power, current, voltage, earth resistance. Connect single/3-phase motors (star/delta) (NOS: ELE/N1002).
5. Electronic Components: Identify electronic components & colour codes (transistor, capacitor, diode, amplifier, IC). Perform soldering (NOS: ELE/N3112).
6. Gas Welding: Perform gas welding, brazing, soldering with safety precautions (NOS: ELE/N3112).
7. RAC Tools: Identify RAC tools/equipment, recognize RAC system parts. Copper tube cutting, flaring, swaging, brazing (NOS: ELE/N3108).
8. Refrigerator Service: Test mechanical/electrical components. Leak test, vacuuming, gas charging, wiring, refrigerator installation (NOS: ELE/N3112).
9. Refrigerator Components: Identify electrical/mechanical components of refrigerator (NOS: ELE/N3112).
10. Compressor Testing: Test compressor motor terminals, start Direct/relay, flushing, leak testing, capillary/filter drier replacement, evacuation, gas charging (NOS: ELE/N3112).
11. Frost-Free Refrigerator: Check frost-free refrigerator components (electrical/mechanical), wiring, air distribution, leak detection, evacuation, gas charging (NOS: ELE/N3112).
12. Compressor Repair: Dismantle, repair, assemble hermetic/fixed/variable speed compressors. Test performance (NOS: ELE/N3112).
13. Sealed Compressor: Identify sealed compressor terminals/wiring. Measure current/volts/watts. Use DOL starter (NOS: ELE/N3112).

MP ITI Training Officer Refrigeration & AC Technician Syllabus

1. Compressor Selection: Select hermetic compressors for appliances, starting methods, test controls/safety cutouts (NOS: ELE/N3112).
2. Inverter AC Controls: Identify Inverter AC control system components and wiring (NOS: ELE/N3114).
3. Condenser Servicing: Servicing & de-scaling of condensers (internal/external) for different appliances (NOS: ELE/N3114).
4. Refrigerant Controls: Fitting/adjustment of drier, filter, refrigerant controls in refrigeration systems (NOS: CSC/N9413).
5. Evaporator Servicing: Servicing different evaporators used in various appliances (NOS: CSC/N9414).
6. Refrigerant Recovery: Recovery/recycling of refrigerants, CFC/HFC alternatives, gas cylinder handling (NOS: ELE/N3114).
7. Ozone-Friendly Retrofit: Retrofit CFC/HFC machines with ozone-friendly refrigerants ensuring compatibility (NOS: ELE/N3114).
8. Thermal Insulation: Pack thermal insulation, prevent cooling leakage (NOS: ELE/N3114).
9. Window AC Installation: Install window AC, test electrical/electronics components, fault diagnosis/remedial measures (NOS: ELE/N3114).
10. Split AC Servicing: Servicing electrical/electronic controls, installation, wiring, fault finding/remedial measures for split AC (NOS: ELE/N3114).
11. Car AC Servicing: Servicing car AC, fault diagnosis, remedial measures (NOS: ELE/N3114).
12. Engineering Drawing: Read/apply engineering drawings for RAC field applications (NOS: CSC/N9401).

Topics

1. Basic Mathematics: Demonstrate mathematical concepts/principles for practical RAC operations (NOS: CSC/N9402).
2.  Commercial Compressor Servicing (NOS-ELE/N3140): Carry out complete servicing of various commercial compressors – dismantle, check parts (pistons, valves, crankshaft), replace worn components, verify lubrication system, reassemble, and performance test under load.
3. Water-Cooled Condenser Maintenance (NOS-ELE/N3140): Service different water-cooled condensers – clean tubes, check water flow, descale deposits, test heat rejection capacity, pressure drop across condenser.
4. Cooling Tower Performance Testing (NOS-ELE/N3141): Perform complete cooling tower servicing – check fill media, fans, pumps, drift eliminators, measure approach temperature, wet bulb depression, and fan power consumption.
5. Water Treatment Plant (NOS CSC/N9415): Service circulating water treatment plant – backwash filters, regenerate softening resin, chemical dosing for scale/corrosion control, maintain water quality parameters (TDS, pH, hardness).
6. Expansion Valve Fitting (NOS-ELE/N3140): Install/adjust thermostatic expansion valve (TXV) – set superheat, match refrigerant flow to evaporator heat load, balance system pressures.
7. Evaporator & Chiller Servicing (NOS-ELE/N3140): Service shell-tube, flooded, DX evaporators, chillers – clean tubes/coils, check refrigerant distribution, defrost systems, capacity testing.

Topics

1. Water Cooler/Dispenser Retrofit (NOS CSC/N9416): Service domestic water coolers – compressor replacement, capillary cleaning, retrofit R22 to R134a/R600a, performance verification.
2. Visible/Bottle Cooler (NOS CSC/N9417): Service commercial visible coolers – glass door defrost, lighting, retrofit ozone-friendly refrigerants, energy consumption testing.
3. Deep Freezer Servicing (NOS CSC/N9418): Maintain deep freezers (-18°C to -25°C) – check low-temp compressors, insulation integrity, defrost timers, pull-down capacity testing.
4. Ice Cube Machine (NOS CSC/N9419): Complete installation/service – evaporator freeze cycle, hot gas defrost, water pump/filter, gas charging, ice production rate testing.
5. Ice Candy Plant (NOS CSC/N9420): Repair ice candy machines – mould freezing, brine agitation, compressor sizing, retrofit for modern refrigerants.
6. Ice Plant & Evaporative Condenser (NOS CSC/N9421): Service ammonia/R404A ice plants – block ice cans, evaporative condenser scaling, ammonia safety procedures.
7. Walk-in Cooler/Cold Storage (NOS CSC/N9422): Preventive maintenance – door gaskets, floor insulation, unit cooler defrost, temperature logging, energy audit.
8. Psychrometric Chart (NOS-ELE/N3140): CRITICAL TOPIC – Study psychrometric chart, measure DBT/WBT/RH/airflow using sling psychrometer, anemometer. Calculate relative humidity, dew point, specific enthalpy.

More Topics

1. Motors & Blowers (NOS-ELE/N3141): Service AC motors, centrifugal/axial blowers, EC fans – bearing lubrication, belt tensioning, vibration analysis, airflow measurement.
2. Air Duct Insulation (NOS-ELE/N3141): Construct/install thermal/acoustic insulation for ducts – rockwool, nitrile rubber, vapour barrier, acoustic liners, duct leakage testing.
3. Air Filters Maintenance (NOS-ELE/N3141): Service panel, bag, HEPA filters – pressure drop measurement, cleaning/replacement schedule, air quality testing.
4. Package AC (Air-Cooled) (NOS CSC/N9423): Complete servicing – rooftop package units, fault diagnosis (low cooling, high power), condenser coil cleaning.
5. Package AC (Water-Cooled) (NOS-ELE/N3140): Service water-cooled package AC – cooling tower integration, water treatment, chiller barrel servicing.
6. Central AC Components (NOS-ELE/N3141): Identify AHU, dampers, VFDs, make wiring. Service air handling units, airflow balancing, condenser descaling, cooling tower maintenance.
7. Pump Down Procedure (NOS-ELE/N3140): ESSENTIAL SKILL – Pump down system to isolate refrigerant, top up compressor oil/gas, monitor superheat/subcooling, pressure-temperature relationship.
8. DX System (NOS-ELE/N3140): Direct Expansion system – test expansion valve, wiring, leak detection, evacuation (500 microns), gas charging by weight/superheat, performance curves.
9. VRF/VRV Systems (NOS-ELE/N3141): Variable Refrigerant Flow – outdoor unit servicing, EEV calibration, communication errors, multi-zone balancing.
10. Chiller Systems (NOS-ELE/N3141): Indirect/chilled water systems – screw/centrifugal chillers, leak testing, oil separator, purge unit operation.
11. Chilled Water Pipeline (NOS-ELE/N3141): Service dampers, FCU (Fan Coil Units), chilled water control valves, balancing valves, strainer cleaning.
12. Central AC Troubleshooting (NOS-ELE/N3141): HIGH WEIGHTAGE – Complete DX/indirect system troubleshooting, cooling tower/water treatment integration, control systems.
13. Mobile AC Servicing (NOS-ELE/N3141): Car AC – magnetic clutch testing, leak detection, evacuation, gas charging, expansion valve replacement, performance testing.
14. Preventive Maintenance (NOS-ELE/N3141): CRITICAL – Daily/weekly/monthly PM schedules, log book maintenance, vibration analysis, oil analysis, capacity logging.

 55 & 56) Engineering Drawing/Math (NOS CSC/N9401, N9402): Read P&ID diagrams, calculate refrigeration tonnage, COP, pressure-enthalpy charts.

MPESB ITI Training Officer 2026: Diesel Mechanic Syllabus

Complete Diesel Mechanic Syllabus (16 Topics)

1. Precision Measuring & Marking (NOS: ASC/N1404): Check & perform measuring/marking using Vernier Callipers, Micrometer, Telescope gauges, Dial bore gauges, Dial indicators, straightedge, feeler gauge, thread pitch gauge, vacuum gauge, tire pressure gauge. Safety precautions mandatory.
2. Fastening & Fitting Operations (NOS: ASC/N1405): Plan & perform basic fastening/fitting using hand tools (files, hacksaws, chisels), machine tools (drill press, grinder, lathe). Tolerance checking essential.
3. Electrical/Electronic Circuits (NOS: ASC/N1435): Trace/test all electrical & electronic components (battery, alternator, starter, ECU, sensors, wiring harness). Assemble circuits ensuring system functionality (circuit continuity, voltage drop testing).
4. Hydraulic/Pneumatic Systems (NOS: CSC/N9465): Trace & test hydraulic/pneumatic components – cylinders, valves, pumps, hoses, fittings. Pressure testing & leak detection.
5. Vehicle Specifications (NOS: ASC/N1404): Check/interpret vehicle specification data & VIN. Operate service station equipment – wheel balancer, tire changer, alignment machine, diagnostic scanner.
6. Diesel Engine Dismantling (NOS: ASC/N9403): CORE SKILL – Complete dismantling & assembling of LMV/HMV diesel engines (cylinder head, pistons, crankshaft, camshaft, timing gears, gasket replacement).
7. Diesel Engine Overhauling (NOS: ASC/N9404): Complete engine overhaul – bore/ hone cylinders, grind valves, lap seats, measure clearances, reassemble with new bearings/seals, compression testing.
8. Cooling & Lubrication Systems (NOS: ASC/N9408): Trace/test/service engine cooling (radiator, water pump, thermostat, fan clutch) & lubrication systems (oil pump, filter, pressure relief valve, oil cooler).
9. Intake & Exhaust Systems (NOS: ASC/N9406): Trace/test/service turbocharger, intercooler, air filter, EGR valve, DPF, exhaust manifold, muffler, backpressure testing.
10. Fuel Feed System (NOS: ASC/N9402): HIGH WEIGHTAGE – Overhaul fuel injection pump (inline/rotary), injectors, fuel filter, high-pressure lines, priming pump. Nozzle pop pressure testing.

MPESB ITI Training Officer Diesel Mechanic Syllabus

1. Stationary Diesel Engine (NOS: ASC/N9409): Overhaul generator set/stationary diesel engines – flywheel, governor adjustment, load testing.
2. Emission Control (NOS: ASC/N9407): Monitor vehicle pollution – smoke meter, CO/HC analyzer, BS-VI norms compliance, DPF regeneration procedures.
3. Alternator & Starter Overhaul (NOS: ASC/N9436): Complete servicing – stator/rotor rewinding, voltage regulator testing, solenoid replacement, bench testing.
4. Vehicle Defect Diagnosis (NOS: ASC/N1438): CRITICAL – Diagnose/rectify LMV/HMV defects – engine no-start, overheating, power loss, abnormal noise, transmission issues using diagnostic tools.
5. Engineering Drawing (NOS: CSC/N9401): Read/apply engineering drawings – assembly drawings, sectional views, tolerance dimensions for diesel engine components.
6.  Basic Mathematics/Science (NOS: CSC/N9402): Demonstrate mathematical concepts (areas, volumes, gear ratios, torque calculations) & explain basic science (thermodynamics, fluid mechanics) for practical diesel operations.

Check all detailed MPESB ITI Training Officer Syllabus By Link Given Below:

Related:

MPESB ITI Training Officer Recruitment 2026: Application Open On 17 January MPESB Group 1 Sub Group 2 Recruitment 2025 Notification Out: Application Form, Eligibility, Steps To Apply MPESB Group 2 (Sub Group -3) 2025: Exam Dates, Admit Card, Syllabus, Preparation Tips MPESB Group 2 Sub Group 3 Exam Question paper, PYQs MPESB Group 2 Sub Group 3 Admit Card 2025: Exam Dates, Syllabus, Preparation Tips MPESB Police Subedar/ASI Result 2025: Expected Cutoff, Selection Process